304 North Cardinal St.
Dorchester Center, MA 02124
304 North Cardinal St.
Dorchester Center, MA 02124
How To Clean A Brass Elephant?
How do you clean badly tarnished brass? Combine the juice of half a lemon with a teaspoon of baking soda and stir until it becomes a paste. Apply the paste with a soft cloth. If the tarnish is heavy, let the piece sit with the paste on it for 30 minutes. Rinse with warm water and dry.
What is the fastest way to clean brass? Mix together 1/2 cup of vinegar, a teaspoon of salt, and a sprinkling of flour until it forms a paste. Spread the mixture on the brass and allow it to sit for a few minutes. Rinse with cool water and dry. (This method also works on corroded brass.)
What is the best homemade brass cleaner? To make an inexpensive homemade brass cleaner, mix equal parts salt and flour with enough vinegar to make a thick paste. Rub on vigorously with a damp cloth. Then wash, rinse, and dry thoroughly. Mix 1 tablespoon of salt and 2 tablespoons of vinegar in 1 pint of water.
Vinegar. Dissolve 1 teaspoon salt in 1/2 cup vinegar and add enough flour to make a paste. Rub onto the brass and leave for 10 minutes, then rinse and buff dry.
Over time, even the shiniest brass gets tarnished, dirty and dingy. In many cases, simple household products such as vinegar and salt can clean brass. They’re a safe and inexpensive alternative to commercial cleaners.
Let’s begin with a cleaning tip: If you have some tarnished or corroded brass that you want to clean, an old brass candlestick for example, you can use Coca-Cola, or any other cola soft drink, and that brass will come clean.
We like to use WD-40. It is not only very easy to use, but is also quick and very effective. All you need to do is coat the gold and brass lamp with a layer of WD-40, which is a great to clean brass and let it sit for about 15-30 minutes. Take a clean cloth and rub the lamp in circular motions drying and buffing it up.
Use a salt-and-vinegar mixture with one cup of vinegar and one tablespoon salt. The mixture will create a paste that you can rub on your brass to remove the green coloring. After the green oxidation has been completely removed, you can rub a little olive oil on your brass to make it shine like new.
For basic maintenance and to make unlacquered brass shine without stripping away the patina, Anthony Cassano of Greenwich Metal, in Stamford, Connecticut, recommends using polish-soaked cloths, such as Cape Cod Metal-polishing Cloths ($20 for 12, capecodpolish.com).
The acetic acid in the vinegar and the sodium in the baking soda work together to dissolve the tarnish. And the baking soda provides just the right amount of grit to scrub all that tarnish away, without scratching the surface of the piece that you’re cleaning.
Soak heavily tarnished brass pieces in a baking soda and vinegar mixture. Brass is composed of differing amounts of zinc and copper, including “basic” brass, which is made from 33 percent zinc and 67 percent copper. Removing tarnish is safely accomplished with a mixture of baking soda and white vinegar.
True brass is an alloy of copper and zinc. It tends to oxidize (tarnish) quickly when exposed to air, which is a major reason why most brass is given a clear coating of lacquer to prevent this condition. Brass turns “black” when cleaning due to over-use and misuse of polish.
Since hydrogen peroxide fights bacteria as an oxidizing agent, it makes sense that it could be used to oxidize metal as well. This means you can use hydrogen peroxide on metals like brass and copper to quickly make them look rusted for a unique, antique look.
Brasses (Trumpets and Trombones) can be cleaned with Pledge and a clean cloth. NO SOAP, WINDEX or other chemicals are to be used as cleaning agents.
Clean away any grime from the brass using warm, soapy water and a soft toothbrush, dry thoroughly with a clean cloth or blow dryer, and rub away any lingering discoloration with a cotton swab soaked in isopropyl alcohol, which is also called rubbing alcohol.
Ketchup & Tomato Juice
The first natural cleaner for brass is ketchup. Yes, ketchup. The mild acid in tomatoes removes tarnish and dirt from brass. Rub ketchup onto your brass item with a soft cloth, rinse with warm water and then dry thoroughly.
Solid brass is not magnetic. If the magnet sticks, the item is usually steel or cast iron, with a brass plating. If the magnet does not stick, you can test further by scratching a hidden area with a sharp tool. If you see a shiny yellow scratch, the item is likely solid brass.
Start by squeezing the juice from half of a lemon into a bowl. Add 1 teaspoon baking soda and mix. With a clean cloth, rub some of the mixture onto the brass. Polish and buff away grime, reapplying the mixture as needed.
While many commercial products are available that age brass, using vinegar and salt is an inexpensive, non-toxic option for altering the appearance of brass handles, knobs, hinges or decorative accent pieces that you can do in your own kitchen.
It is possible that Sugar Soap could tarnish or discolour these metals if they are bare. It can also leave a hard to remove deposit if left to dry on hard surfaces like glass or smooth metals.
Let the ketchup sit for 15 minutes to an hour.
Once you’ve coated the item, the ketchup will start to break down the tarnish. The length of time you’ll need to leave it on depends on how tough the tarnish is. After about 15 minutes, wipe away a little of the ketchup and check whether the brass looks bright and shiny.
WD-40 as a Brass Cleaner
But did you know the many uses of the spray extend to polishing and finishing all sorts of metals. Spray a small amount onto a soft, clean cloth; and rub into the dull brass with a continuous circular motion. You’ll find yourself amazed to see it working as an effective brass cleaner.
In addition to what it claims on the tin, it will also clean tarnish stains from silver and brass.
Brass’s patina effect turns it a little more green; copper’s is a bit closer to blue. Galvanized steel and aluminum are two other metals that change when oxidized, just not in the same way as copper and brass. Galvanized steel will actually take on a white-like color due to its high zinc content.